Series & Model
Product Picture

The SAF heavy duty, high flow submersible product has been designed with high flow impeller designs and high end motor features, all designed to give you long life. The pump features various axial impellers geometries designed specifically for high flows. The motor features an epoxy resin sealed cable base, an overload “Auto-Cut” protector and oil lubricated double mechanical seals.

Performance Charachteristics
 Performance Curves
Capacities to: 20,000 GPM (4,543 m^3/hr)

Heads to: 18 Feet (6 m)

Temperatures to: 100 F (38 C)

Speed ranges: 1800 to 600 RPM
Features & Benefits Markets
Heavy duty casings and axial impellers.
Axial impellers designed for high flow and low pressure applications.
Dual, oil lubricated, hard face silicon-carbide mechanical seals with all seal hardware located out of the pump fluid.
Integral oil lip seal protects the outboard mechanical seal from large solids.
Integral moisture sensor located in oil lubricated mechanical seal chamber.
Hardened epoxy motor base cable that prevents water from entering motor.
High efficiency, copper wound, air filled motor design with 8 hour, varnish cured, Class F insulation.
"Auto-Cut" motor protection protects the motor from damage due to high amperage draw, locked impeller or high temperature.
All motors are rated for continuous duty service.
Construction
Mining & Aggregate
Power Generation
Water & Wastewater
Additional Information





Copyright © . American-Marsh Pumps customerservice@american-marsh.com Phone: 800.888.7167 Fax: 901.860.2323